API PSL 2 WELDED PIPE
S. Piping Solutions is stockiest, suppliers & exporters of API 5L Line Pipe, API 5L PSL1 Seamless Pipe, API 5L PSL2 Seamless Pipe, API 5L PSL1 Welded Pipe, API 5L PSL2 Welded Pipe, API ERW Pipe, API HFW Pipe, API SAW Pipe, API LSAW Pipe, API HSAW Pipe, API DSAW Pipe, API 5L Sour Service Pipe, API 5L Offshore Service Pipe.
S. Piping Solutions is a family corporation grounded in hard work, integrity and trust, values integral to all we do. Throughout more than 40 years experience in the international markets, Ashtapad has successfully entered into Mid-east, Australia, America, Africa and Europe markets, providing piping system materials and serving for CNPC, ARAMCO, KOC, CCC, NIOC, CHEVRON, LINDE, PEMEX, FLUOR, NNPC, SONATRACH, TECHNIP, PETROFAC, PETRONAS, PDVSA, SHELL, BP, etc. Reliable can supply API 5L PSL1 & PSL2 Pipe/ ERW/ SAWH/ SAWL/ Coil Tube Linepipe with 3LPE/3LPP/2FBE Coating.
The environment management system of the company is certified according to the requirements of ISO 9001:2008, 14001, 18001, ISO 18001:2007, PED 97/23/EC & Govermment Recognized Export House. Few of the major brands we represent are Arcelor Mittal, Sumitomo, Tenaris, Benteler, Jazeera Steel, Hyundai HYSCO, Arabian Pipes Company, Sandvik, Froch, etc. Our materials are approved by Saudi ARAMCO, SABIC, SHELL, ADNOC, GASCO, PDO, KNPC, KOC, QATAR Gas, OXY, IOOC, SGC etc. It is recognized by major inspection agencies like TUV, DNV, Velosi, Lloyds, Gl, Intertek Moody, BV , SGS, EIL, Jacob H & G, Bax Council, Mecon, PDIL, UDHE, Toyo, ABS, BARC etc.
We are exporting to more than 40 countries like UAE, EGYPT, TURKEY, Singapore, Malaysia, Iran, Iraq, Saudi Arabia, Bahrain, Qatar, Yemen, Kuwait, Argentina, Palestin, Algeria, Italy, Tunisia, Oman, Mauritania, USA, Bangladesh, Lebanon, Canada, Vietnam, Sudan, Syria, Morocco, Libya, Jordon, Indonesia, The Netherland, Brazil, Polland, Korea, USA, UK, Croatia, China, France, Ecuador, South Korea, South America, and many more..
Reliable Pipes & Tubes Ltd. can supply superior Quality High strength, High Toughness, Homogeneous material and Corrosion Resistant Line Pipes for various special services such as offshore and sour services.
Grades covered by this specification are A25 ,A ,B (and the following "X" Grades), X42, X46, X52, X56, X60, X65, X70, X80. The two digit number following the "X" indicates the Minimum Yield Strength (in 000's psi) of pipe produced to this grade.
Chemical composition for PSL 2 pipe with t ≤ 25,0 mm (0.984 in)
| Steel grade (steel name) | Mass fraction, based upon heat and product analyses % maximum |
Carbon equivalenta % maximum |
|||||||||
| C b | Si | Mn b | P | S | V | Nb | Ti | Other | CEiiw | CEpcm | |
| Welded pipes | |||||||||||
| L245R or BR | 0,24 | 0,40 | 1,20 | 0,025 | 0,015 | c | c | 0,04 | e | 0,43 | 0,25 |
| L290R or X42R | 0,24 | 0,40 | 1,20 | 0,025 | 0,015 | 0,06 | 0,05 | 0,04 | e | 0,43 | 0,25 |
| L245N or BN | 0,24 | 0,40 | 1,20 | 0,025 | 0,015 | c | c | 0,04 | e | 0,43 | 0,25 |
| L290N or X42N | 0,24 | 0,40 | 1,20 | 0,025 | 0,015 | 0,06 | 0,05 | 0,04 | e | 0,43 | 0,25 |
| L320N or X46N | 0,24 | 0,40 | 1,40 | 0,025 | 0,015 | 0,07 | 0,05 | 0,04 | d,e | 0,43 | 0,25 |
| L360N or X52N | 0,24 | 0,45 | 1,40 | 0,025 | 0,015 | 0,10 | 0,05 | 0,04 | d,e | 0,43 | 0,25 |
| L390N or X56N | 0,24 | 0,45 | 1,40 | 0,025 | 0,015 | 0,10f | 0,05 | 0,04 | d,e | 0,43 | 0,25 |
| L415N or X60N | 0,24f | 0,45f | 1,40f | 0,025 | 0,015 | 0,10f | 0,05 | 0,04f | g,h | as agreed | |
| L245Q or BQ | 0,18 | 0,45 | 1,40 | 0,025 | 0,015 | 0,05 | 0,05 | 0,04 | e | 0,43 | 0,25 |
| L290Q or X42Q | 0,18 | 0,45 | 1,40 | 0,025 | 0,015 | 0,05 | 0,05 | 0,04 | e | 0,43 | 0,25 |
| L320Q or X46Q | 0,18 | 0,45 | 1,40 | 0,025 | 0,015 | 0,05 | 0,05 | 0,04 | e | 0,43 | 0,25 |
| L360Q or X52Q | 0,18 | 0,45 | 1,50 | 0,025 | 0,015 | 0,05 | 0,05 | 0,04 | e | 0,43 | 0,25 |
| L390Q or X56Q | 0,18 | 0,45 | 1,50 | 0,025 | 0,015 | 0,07 | 0,05 | 0,04 | d,e | 0,43 | 0,25 |
| L415Q or X60Q | 0,18f | 0,45f | 1,70f | 0,025 | 0,015 | g | g | g | h | 0,43 | 0,25 |
| L450Q or X65Q | 0,18f | 0,45f | 1,70f | 0,025 | 0,015 | g | g | g | h | 0,43 | 0,25 |
| L485Q or X70Q | 0,18f | 0,45f | 1,80f | 0,025 | 0,015 | g | g | g | h | 0,43 | 0,25 |
| L555Q or X80Q | 0,18f | 0,45f | 1,90f | 0,025 | 0,015 | g | g | g | i,j | as agreed | |
| L245M or BM | 0,22 | 0,45 | 1,20 | 0,025 | 0,015 | 0,05 | 0,05 | 0,04 | e | 0,43 | 0,25 |
| L290M or X42M | 0,22 | 0,45 | 1,30 | 0,025 | 0,015 | 0,05 | 0,05 | 0,04 | e | 0,43 | 0,25 |
| L320M or X46M | 0,22 | 0,45 | 1,30 | 0,025 | 0,015 | 0,05 | 0,05 | 0,04 | e | 0,43 | 0,25 |
| L360M or X52M | 0,22 | 0,45 | 1,40 | 0,025 | 0,015 | d | d | d | e | 0,43 | 0,25 |
| L390M or X56M | 0,22 | 0,45 | 1,40 | 0,025 | 0,015 | d | d | d | e | 0,43 | 0,25 |
| L415M or X60M | 0,12f | 0,45f | 1,60f | 0,025 | 0,015 | g | g | g | h | 0,43 | 0,25 |
| L450M or X65M | 0,12f | 0,45f | 1,60f | 0,025 | 0,015 | g | g | g | h | 0,43 | 0,25 |
| L485M or X70M | 0,12f | 0,45f | 1,70f | 0,025 | 0,015 | g | g | g | h | 0,43 | 0,25 |
| L555M or X80M | 0,12f | 0,45f | 1,85f | 0,025 | 0,015 | g | g | g | i | 0,43f | 0,25 |
| L625M or X90M | 0,10 | 0,55f | 2,10f | 0,020 | 0,010 | g | g | g | i | --- | 0,25 |
| L690M or X100M | 0,10 | 0,55f | 2,10f | 0,020 | 0,010 | g | g | g | i,j | 0,25 | |
| L830M or X120M | 0,10 | 0,55f | 2,10f | 0,020 | 0,010 | g | g | g | i,j | 0,25 | |
Table ---Chemical composition for PSL 2 pipe with t ≤ 25,0 mm (0.984 in) (Continued)
a Based upon product analysis. For seamless pipe with t > 20,0 mm (0.787 in), the carbon equivalent limits shall be as agreed. The CEiiw limits apply if the carbon mass fraction is greater than 0,12 % and the CEpcm limits apply if the carbon mass fraction is less than or equal to 0,12 %.
b For each reduction of 0,01 % below the specified maximum for carbon, an increase of 0,05 % above the specified maximum for manganese is permissible, up to a maximum of 1,65 % for grades ≥ L245 or B, but ≤ L360 or X52; up to a maximum of 1,75 % for grades >L360 or X52, but < L485 or X70; up to a maximum of 2,00 % for grades ≥L485 or X70, but ≤ L555 or X80; and up to a maximum of 2,20 % for grades >L555 or X80.
c Unless otherwise agreed , the sum of the niobium and vanadium concentrations shall be ≤ 0,06 %.
d The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0,15 %.
e Unless otherwise agreed, 0,50 % maximum for copper, 0,30 % maximum for nickel, 0,30 % maximum for chromium and 0,15 % maximum for molybdenum.
f Unless otherwise agreed.
g Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0,15 %.
h Unless otherwise agreed, 0,50 % maximum for copper, 0,50 % maximum for Nickel, 0,50 % maximum for chromium and 0,50 % maximum for molybdenum.
i Unless otherwise agreed, 0,50 % maximum for copper, 1,00 % maximum for nickel, 0,50 % maximum for chromium and 0,50 % maximum for molybdenum.
j 0,004 % maximum for boron.
Chemical compostion
9.2.4 For PSL 2 pipe with a product analysis carbon mass fraction equal to or less than 0,12 %, the carbon equivalent, CEpcm, shall be determined using Equation (2):
where the symbols for the chemical elements represent the mass fraction in percent (see Table 5).
.If the heat analysis for boron is less than 0,000 5 % then it is not necessary for the product analysis to include boron, and the boron content may be considered to be zero for the CEpcm calculation.
9.2.5 For PSL 2 pipe with a product analysis carbon mass fraction greater than 0,12 % the carbon equivalent, CEllw shall be determined using Equation (3):
where the symbols for the chemical elements represent the mass fraction in percent (see Table 5).
NOTE: A derogation from the ISO rules for the presentation of chemical equations has been granted for Equations (2) and (3) in deference to their longstanding use in the industry.
API 5L PSL 2 Pipe Mechanical Properties Table
| Pipe grade | Pipe body of seamless pipes | Weld seam of HFW, SAW and COW pipes | |||||
| Yield strength Rto,5b MPa (psi) |
Tensile strength Rm MPa (psi) |
Ratioa,b,c Rto,5/Rm |
Elongation Af % |
Tensile strength Rm MPa (psi) |
|||
| minimum | maximum | minimum | maximum | maximum | minimum | minimum | |
| L245R or BR L245N or BN L245Q or BQ L245M or BM |
245 (35 500) |
450 e (65 300) e |
415 (60 200) |
760 (110 200) |
0,93 | f | 415 (60 200) |
| L290R or X42R L290N or X42N L290Q or X42Q L290M or X42M |
290 (42 100) |
495 (71 800) |
415 (60 200) |
760 (110 200) |
0,93 | f | 415 (60 200) |
| L320N or X46N L320Q or X46Q L320M or X46M |
320 (46 400) |
525 (76 100) |
435 (63 100) |
760 (110 200) |
0,93 | f | 435 (63 100) |
| L360N or X52N L360Q or X52Q L360M or X52M |
360 (52 200) |
530 (76 900) |
460 (66 700) |
760 (110 200) |
0,93 | f | 460 (66 700) |
| L390N or X56N L390Q or X56Q L390M or X56M |
390 (56 600) |
545 (79 000) |
490 (71 100) |
760 (110 200) |
0,93 | f | 490 (71 100) |
| L415N or X60N L415Q or X60Q L415M or X60M |
415 (60 200) |
565 (81 900) |
520 (75 400) |
760 (110 200) |
0,93 | f | 520 (75 400) |
| L450Q or X65Q L450M or X65M |
450 (65 300) |
600 (87 000) |
535 (77 600) |
760 (110 200) |
0,93 | f | 535 (77 600) |
| L485Q or X70Q L485M or X70M |
485 (70 300) |
635 (92 100) |
570 (82 700) |
760 (110 200) |
0,93 | f | 570 (82 700) |
| L555Q or X80Q L555M or X80M |
555 (80 500) |
705 (102 300) |
625 (90 600) |
825 (119 700) |
0,93 | f | 625 (90 600) |
| L625M or X90M | 625 (90 600) |
775 (112 400) |
695 (100 800) |
915 (132 700) |
0,95 | f | 695 (100 800) |
| L690M or X100M | 690 (100 100) |
840 (121 800) |
760 (110 200) |
990 (143 600) |
0,97 g | f | 760 (110 200) |
| L830M or X120M | 830 (120 400) |
1 050 (152 300) |
915 (132 700) |
1 145 (166 100) |
0,99 g | f | 915 (132 700) |
a For intermediate grades, the difference between the specified maximum yield strength and the specified minimum yield strength shall be as given in the table for the next higher grade, and the difference between the specified minimum tensile strength and the specified minimum yield strength shall be as given in the table for the next higher grade, For intermediate grades lower than Grade L555 or X80, the tensile strength shall be ≤ 760 MPa (110 200 psl). For intermediate grades higher than Grade L555 or X80, the maximum permissible tensile strength shall be obtained by interpolation. For SI units, the calculated value shall be rounded to the nearest 5 MPa. For USC units, the calculated value shall be rounded to the nearest 100 psi.
b For grades >L625 or X90, Rp0,2 applies.
c This limit applies for pipe with D >323, 9 mm (12.750 in).
d For intermediate grades, the specified minimum tensile strength for the weld seam shall be the same value as was determined for the pipe body using footnote a).
e For pipe with D<219,1 mm (8.625 in), the maximum yield strength shall be ≤495 MPa (71 800 psi).
f The specified minimum elongation, Af, shall be as determined using the following equation:
Where
C is 1 940 for calculations using SI units and 625 000 for calculations using USC units;
A xc is the applicable tensile test piece cross-sectional area, expressed in square millimeters (square inches), as follows:
---- for circular cross-section test pieces, 130 mm2 (0.20 in2) for 12,5 mm (0.500 in) and 8,9 mm (0.350 in) diameter test pieces; and 65 mm2 ( 0.10 in2) for 6,4 mm (0.250 in) diameter test pieces;
---- for full-section test pieces, the lesser of a) 485 mm2 (0.75 in2) and b) the cross-sectional area of the test piece, derived using the specified outside diameter and the specified wall thickness of the pipe, rounded to the nearest 10 mm2 (0.01 in2)
---- for strip test pieces, the lesser of a) 485 mm2( 0.75 in2 ) and b) the cross-sectional area of the test piece, derived using the specified width of the test piece and the specified wall thickness of the pipe, rounded to the nearest_10 mm2 (0.01 in2 );
Tolerances for diameter and out-of-roundness
Specified outside diameter D mm (in) |
Diameter tolerances |
Out-of-roundness tolerances |
|
|||
Pipe except the end a |
Pipe end a, b, c |
Pipe except the end a |
Pipe end a, b, c |
|||
SMLS pipe |
Welded pipe |
SMLS pipe |
Welded pipe |
|||
< 60,3 (2.375) |
- 0,8 (0.031) to + 0,4 (0.016) |
|
d |
|||
≥ 60,3 (2.375) |
|
- 0,4 (o.o16) to + 1,6 (0.063) |
0,020 D |
0,015 D |
||
>168,3 (6.625) |
± 0,007 5 D |
± 0,007 5 D |
± 0,005 D, |
|||
> 610 (24.000) |
± 0,01 D |
± 0,005 D, |
± 2,0 (0.079) |
±1,6 (0.063) |
0,015 D |
0,01 D, |
by agreement |
by agreement |
|||||
> 1 422 (56 000) |
as agreed |
|||||
a The pipe end includes a length of 100 mm (4.0 in) at each of the pipe extremities. |
||||||
Tolerances for wall thickness
Wall thickness t mm (in) |
Tolerances a |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SMLS pipe b |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
≤ 4,0 ( 0.157) |
+ 0,6 (0.024) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
> 4,0 ( 0.157) to <25,0 (0.984) |
+ 0,150 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
≥ 25,0 (0.984) |
+3,7 (0.146) or + 0,1 t, whichever is the greater |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Welded pipe c, d |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
≤ 5,0 (0.197) |
± 0,5 (0.020) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
> 5,0 (0.197) to <15,0 (0.591) |
± 0,1 t |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
≥ 15,0 (0.591) |
±1,5 (0.060) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
a if the purchase order specifief a minus tolerance for wall thickness smaller than the applicable value given in this table, the plus tolerance for wall thickness shall be increased by an amount sufficient to maintain the applicable tolerance range. Inspection Frequency for PSL1 Pipe
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Note:- |
|
Other Specification |
API 5L – A,B, X – 42, 46, 52, 56, |
Special Tube |
Saw Pipes & Steam Pipes |
In Form of |
Round |
In Length of |
Standard |
Value Added Service |
Draw & Expansion as per required Size & Length |
Test Certificate |
Manufacturer Test Certificate |
Tests & Certificates |
• Visual and Dimensional Inspection:
• Mechanical Tests:
• Pipe weld and HAZ tests:
• Metallographic Examination
• Non Destructive Inspection:
• Laminations:
Coating: -
The quality level of all Steel Line Pipe, API 5L X46 PSL1 Pipe is guaranteed by a complete internal Quality plan and certificating under ISO-9001, TUV (according to AD 2000-Merkblatt W0/TRD100), API, PED (accordance with Pressure Equipment Directive 97/23/EC), Burst test (Det Norske Veritas), and certainly Lloyds and Stoomwezen. |
We mainly stock the Pipes of following make : Sumitomo Metal - Japan
Nippon Steel - Japan
JFE Steel - Japan
Kawasaki Steel - Japan
Vallourec & Mannesmann - France
Vallourec & Mannesmann - Germany
Vallourec & Mannesmann - Brazil
Salzgitter Mannesmann - Germany
Arcelor Mittal Steel - Romania
Arcelor Mittal Steel - Czech Republic
Tenaris Dalmine - Spain
Tenaris Silcotub - Romania
Tenaris Siderca - Argentina
Tenaris Tamsa - Mexico
Tenaris NKK - Japan
Volzhski - Russia
Nizhnedneprovsky - Ukraine
USS - USA
Welspun - India
Jindal Saw - India
Indian Seamless - India
Maharashtra Seamless – India
Third Party Inspection:
- TUV
- DNV - GL
- VELOSI
- SGS
- Lloyds
- BV
- EIL
- Jacob
- Bax Counsel
- MECON
- PDIL
API-5L-X52 PSL-1 Seamless, ERW, HFW, LSAW, DSAW, HSAW/SSAW (Spiral Welded) Line Pipe
API-5L Grade-B, X-42, X-46, X-52, X-56, X-60, X-65, X-70, X-80 PSL1 PSL2 Line Pipe
API 5L Grade B PSL1 Line Pipes - Available ex-stock
API 5L Grade B PSL1 Sour Service Line Pipes - Available ex-stock
API 5L Grade B PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X42 PSL1 Line Pipes - Available ex-stock
API 5L X42 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X42 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X46 PSL1 Line Pipes - Available ex-stock
API 5L X46 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X46 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X52 PSL1 Line Pipes - Available ex-stock
API 5L X52 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X52 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X56 PSL1 Line Pipes - Available ex-stock
API 5L X56 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X56 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X60 PSL1 Line Pipes - Available ex-stock
API 5L X60 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X60 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X65 PSL1 Line Pipes - Available ex-stock
API 5L X65 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X65 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X70 PSL1 Line Pipes - Available ex-stock
API 5L X70 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X70 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X80 PSL1 Line Pipes - Available ex-stock
API 5L X80 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X80 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
Size Range: -
- Seamless Pipe : ½” to 24”
- ERW Pipe : ½” to 24”
- LSAW/DSAW Pipe : 16” and Above
- HSAW Pipe : 18” and Above
NPS |
SCH 10 |
SCH 20 |
SCH 30 |
SCH STD |
SCH 40 |
SCH 60 |
SCH XS |
SCH 80 |
SCH 100 |
SCH 120 |
SCH 140 |
SCH 160 |
SCH XXS |
1/8" |
 |
|
|
|
|
|
|||||||
1/4" |
|
|
|
|
|
|
|||||||
3/8" |
|
|
|
|
|
|
|||||||
1/2" |
|
|
|
|
|
|
|
|
|||||
3/4" |
|
|
|
|
|
|
|
|
|||||
1" |
|
|
|
|
|
|
|
|
|||||
1 1/4" |
|
|
|
|
|
|
|
|
|||||
1 1/2" |
|
|
|
|
|
|
|
|
|||||
2" |
|
|
|
|
|
|
|
|
|||||
2 1/2" |
|
|
|
|
|
|
|
|
|||||
3" |
|
|
|
|
|
|
|
|
|||||
3 1/2" |
|
|
|
|
|
|
|||||||
4" |
|
|
|
|
|
|
|
|
|
||||
5" |
|
|
|
|
|
|
|
|
|||||
6" |
|
|
|
|
|
|
|
|
|
||||
8" |
|
|
|
|
|
|
|
|
|
|
|
|
|
10" |
|
|
|
|
|
|
|
|
|
|
|
|
|
12" |
|
|
|
|
|
|
|
|
|
|
|
|
|
14" |
|
|
|
|
|
|
|
|
|
|
|
|
|
16" |
|
|
|
|
|
|
|
|
|
|
|
|
|
18" |
|
|
|
|
|
|
|
|
|
|
|
|
|
20" |
|
|
|
|
|
|
|
|
|
|
|
|
|
22" |
|
|
|
|
|
|
|
|
|
|
|
||
24" |
|
|
|
|
|
|
|
|
|
|
|
|
|
26" |
|
|
|
|
|||||||||
28" |
|
|
|
|
|
||||||||
30" |
|
|
|
|
|
||||||||
32" |
|
|
|
|
|
|
|||||||
34" |
|
|
|
|
|
|
|||||||
36" |
|
|
|
|
|
|
|||||||
38" |
|
|
|||||||||||
40" |
|
|
|||||||||||
42" |
|
|
|||||||||||
44" |
|
|
|||||||||||
46" |
|
|
|||||||||||
48" |
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
Note: - We can supply heavy thickness of pipe as per clients requirements.
Other Related Grades: -
API 5L Grade B
API 5L Grade X42
API 5L Grade X46
API 5L Grade X52
API 5L Grade X56
API 5L Grade X60
API 5L Grade X65
API 5L Grade X70
API 5L Grade X80
API 5L Grade B PSL 1
API 5L Grade X42 PSL 1
API 5L Grade X46 PSL 1
API 5L Grade X52 PSL 1
API 5L Grade X56 PSL 1
API 5L Grade X60 PSL 1
API 5L Grade X65 PSL 1
API 5L Grade X70 PSL 1
API 5L Grade X80 PSL 1
API 5L Grade B PSL 2
API 5L Grade X42 PSL 2
API 5L Grade X46 PSL 2
API 5L Grade X52 PSL 2
API 5L Grade X56 PSL 2
API 5L Grade X60 PSL 2
API 5L Grade X65 PSL 2
API 5L Grade X70 PSL 2
API 5L Grade X80 PSL 2
API 5L Grade B PSL 1 SEAMLESS
API 5L Grade X42 PSL 1 SEAMLESS
API 5L Grade X46 PSL 1 SEAMLESS
API 5L Grade X52 PSL 1 SEAMLESS
API 5L Grade X56 PSL 1 SEAMLESS
API 5L Grade X60 PSL 1 SEAMLESS
API 5L Grade X65 PSL 1 SEAMLESS
API 5L Grade X70 PSL 1 SEAMLESS
API 5L Grade X80 PSL 1 SEAMLESS
API 5L Grade B PSL 2 SEAMLESS
API 5L Grade X42 PSL 2 SEAMLESS
API 5L Grade X46 PSL 2 SEAMLESS
API 5L Grade X52 PSL 2 SEAMLESS
API 5L Grade X56 PSL 2 SEAMLESS
API 5L Grade X60 PSL 2 SEAMLESS
API 5L Grade X65 PSL 2 SEAMLESS
API 5L Grade X70 PSL 2 SEAMLESS
API 5L Grade X80 PSL 2 SEAMLESS
API 5L Grade B PSL 1 SAW
API 5L Grade X42 PSL 1 SAW
API 5L Grade X46 PSL 1 SAW
API 5L Grade X52 PSL 1 SAW
API 5L Grade X56 PSL 1 SAW
API 5L Grade X60 PSL 1 SAW
API 5L Grade X65 PSL 1 SAW
API 5L Grade X70 PSL 1 SAW
API 5L Grade X80 PSL 1 SAW
API 5L Grade B PSL 2 SAW
API 5L Grade X42 PSL 2 SAW
API 5L Grade X46 PSL 2 SAW
API 5L Grade X52 PSL 2 SAW
API 5L Grade X56 PSL 2 SAW
API 5L Grade X60 PSL 2 SAW
API 5L Grade X65 PSL 2 SAW
API 5L Grade X70 PSL 2 SAW
API 5L Grade X80 PSL 2 SAW
API 5L Grade B PSL 1 ERW
API 5L Grade X42 PSL 1 ERW
API 5L Grade X46 PSL 1 ERW
API 5L Grade X52 PSL 1 ERW
API 5L Grade X56 PSL 1 ERW
API 5L Grade X60 PSL 1 ERW
API 5L Grade X65 PSL 1 ERW
API 5L Grade X70 PSL 1 ERW
API 5L Grade X80 PSL 1 ERW
API 5L Grade B PSL 2 ERW
API 5L Grade X42 PSL 2 ERW
API 5L Grade X46 PSL 2 ERW
API 5L Grade X52 PSL 2 ERW
API 5L Grade X56 PSL 2 ERW
API 5L Grade X60 PSL 2 ERW
API 5L Grade X65 PSL 2 ERW
API 5L Grade X70 PSL 2 ERW
API 5L Grade X80 PSL 2 ERW
API 5L Grade B PSL 1 HFW
API 5L Grade X42 PSL 1 HFW
API 5L Grade X46 PSL 1 HFW
API 5L Grade X52 PSL 1 HFW
API 5L Grade X56 PSL 1 HFW
API 5L Grade X60 PSL 1 HFW
API 5L Grade X65 PSL 1 HFW
API 5L Grade X70 PSL 1 HFW
API 5L Grade X80 PSL 1 HFW
API 5L Grade B PSL 2 HFW
API 5L Grade X42 PSL 2 HFW
API 5L Grade X46 PSL 2 HFW
API 5L Grade X52 PSL 2 HFW
API 5L Grade X56 PSL 2 HFW
API 5L Grade X60 PSL 2 HFW
API 5L Grade X65 PSL 2 HFW
API 5L Grade X70 PSL 2 HFW
API 5L Grade X80 PSL 2 HFW
API 5L Grade B PSL 1 WELDED
API 5L Grade X42 PSL 1 WELDED
API 5L Grade X46 PSL 1 WELDED
API 5L Grade X52 PSL 1 WELDED
API 5L Grade X56 PSL 1 WELDED
API 5L Grade X60 PSL 1 WELDED
API 5L Grade X65 PSL 1 WELDED
API 5L Grade X70 PSL 1 WELDED
API 5L Grade X80 PSL 1 WELDED
API 5L Grade B PSL 2 WELDED
API 5L Grade X42 PSL 2 WELDED
API 5L Grade X46 PSL 2 WELDED
API 5L Grade X52 PSL 2 WELDED
API 5L Grade X56 PSL 2 WELDED
API 5L Grade X60 PSL 2 WELDED
API 5L Grade X65 PSL 2 WELDED
API 5L Grade X70 PSL 2 WELDED
API 5L Grade X80 PSL 2 WELDED
API A25 PSL 1 SEAMLESS
API A25P PSL 1 SEAMLESS
API A25 PSL 1 WELDED
API A25P PSL 1 WELDED
API BR SEAMLESS & WELDED
API X42R SEAMLESS & WELDED
API BN SEAMLESS & WELDED
API X42N SEAMLESS & WELDED
API X46N SEAMLESS & WELDED
API X52N SEAMLESS & WELDED
API X56N SEAMLESS & WELDED
API X60N SEAMLESS & WELDED
API BQ SEAMLESS & WELDED
API X42 Q SEAMLESS & WELDED
API X46 Q SEAMLESS & WELDED
API X52 Q SEAMLESS & WELDED
API X56 Q SEAMLESS & WELDED
API X60 Q SEAMLESS & WELDED
API X65 Q SEAMLESS & WELDED
API X70 Q SEAMLESS & WELDED
API X80 Q SEAMLESS & WELDED
API X90 Q SEAMLESS & WELDED
API X100 Q SEAMLESS & WELDED
API BM WELDED
API X42 M WELDED
API X46 M WELDED
API X52 M WELDED
API X56 M WELDED
API X60 M WELDED
API X65 M WELDED
API X70 M WELDED
API X80 M WELDED
API X90 M WELDED
API X100 M WELDED
API X120 M WELDED
API BNS SEAMLESS & WELDED
API X42NS SEAMLESS & WELDED
API X46NS SEAMLESS & WELDED
API X52NS SEAMLESS & WELDED
API BQS SEAMLESS & WELDED
API X42QS SEAMLESS & WELDED
API X46QS SEAMLESS & WELDED
API X52QS SEAMLESS & WELDED
API X56QS SEAMLESS & WELDED
API X460QS SEAMLESS & WELDED
API X65QS SEAMLESS & WELDED
API X70QS SEAMLESS & WELDED
API BMS WELDED
API X42MS WELDED
API X46MS WELDED
API X52MS WELDED
API X56MS WELDED
API X60MS WELDED
API X65MS WELDED
API X70MS WELDED
API BNO SEAMLESS & WELDED
API X42NO SEAMLESS & WELDED
API X46NO SEAMLESS & WELDED
API X52NO SEAMLESS & WELDED
API BQO SEAMLESS & WELDED
API X42 QO SEAMLESS & WELDED
API X46 QO SEAMLESS & WELDED
API X52 QO SEAMLESS & WELDED
API X56 QO SEAMLESS & WELDED
API X60 QO SEAMLESS & WELDED
API X65 QO SEAMLESS & WELDED
API X70 QO SEAMLESS & WELDED
API X80 QO SEAMLESS & WELDED
API X90 QO SEAMLESS & WELDED
API X100 QO SEAMLESS & WELDED
API BMO WELDED
API X42 MO WELDED
API X46 MO WELDED
API X52 MO WELDED
API X56 MO WELDED
API X60 NO WELDED
API X65 MO WELDED
API X70 MO WELDED
API X80 MO WELDED
