S Piping Solutions - API PSL1 Line Pipe

api psl1 line pipe

S. Piping Solutions Suppliers and Largest Stockists of API 5L Seamless & Welded Pipes

S. Piping Solutions is stockiest, suppliers & exporters of API 5L Line Pipe, API 5L PSL1 Seamless Pipe, API 5L PSL2 Seamless Pipe, API 5L PSL1 Welded Pipe, API 5L PSL2 Welded Pipe, API ERW Pipe, API HFW Pipe, API SAW Pipe, API LSAW Pipe, API HSAW Pipe, API DSAW Pipe, API 5L Sour Service Pipe, API 5L Offshore Service Pipe.

S. Piping Solutions is a family corporation grounded in hard work, integrity and trust, values integral to all we do. Throughout more than 40 years experience in the international markets, Ashtapad has successfully entered into Mid-east, Australia, America, Africa and Europe markets, providing piping system materials and serving for CNPC, ARAMCO, KOC, CCC, NIOC, CHEVRON, LINDE, PEMEX, FLUOR, NNPC, SONATRACH, TECHNIP, PETROFAC, PETRONAS, PDVSA, SHELL, BP, etc. Reliable can supply API 5L PSL1 & PSL2 Pipe/ ERW/ SAWH/ SAWL/ Coil Tube Linepipe with 3LPE/3LPP/2FBE Coating.

The environment management system of the company is certified according to the requirements of ISO 9001:2008, 14001, 18001, ISO 18001:2007, PED 97/23/EC & Govermment Recognized Export House. Few of the major brands we represent are Arcelor Mittal, Sumitomo, Tenaris, Benteler, Jazeera Steel, Hyundai HYSCO, Arabian Pipes Company, Sandvik, Froch, etc. Our materials are approved by Saudi ARAMCO, SABIC, SHELL, ADNOC, GASCO, PDO, KNPC, KOC, QATAR Gas, OXY, IOOC, SGC etc. It is recognized by major inspection agencies like TUV, DNV, Velosi, Lloyds, Gl, Intertek Moody, BV , SGS, EIL, Jacob H & G, Bax Council, Mecon, PDIL, UDHE, Toyo, ABS, BARC etc.

We are exporting to more than 40 countries like UAE, EGYPT, TURKEY, Singapore, Malaysia, Iran, Iraq, Saudi Arabia, Bahrain, Qatar, Yemen, Kuwait, Argentina, Palestin, Algeria, Italy, Tunisia, Oman, Mauritania, USA, Bangladesh, Lebanon, Canada, Vietnam, Sudan, Syria, Morocco, Libya, Jordon, Indonesia, The Netherland, Brazil, Polland, Korea, USA, UK, Croatia, China, France, Ecuador, South Korea, South America, and many more..

Reliable Pipes & Tubes Ltd. can supply superior Quality High strength, High Toughness, Homogeneous material and Corrosion Resistant Line Pipes for various special services such as offshore and sour services.

Grades covered by this specification are A25 ,A ,B (and the following "X" Grades), X42, X46, X52, X56, X60, X65, X70, X80. The two digit number following the "X" indicates the Minimum Yield Strength (in 000's psi) of pipe produced to this grade.

Chemical composition for PSL 1 pipe with t ≤ 25,0 mm (0.984 in)

Steel grade (Steel name)	Mass fraction, based upon heat and product analyses a %
	C max.b	Mn max.b	P		S max.	V max.	Nb max.	Ti max.
	C max.b	Mn max.b	min.	max.	S max.	V max.	Nb max.	Ti max.
Seamless pipe
L175 or A25	0,21	0,60	-	0,030	0,030	-	-	-
L175P or A25P	0,21	0,60	0,045	0,080	0,030	-	-	-
L210 or A	0,22	0,90	-	0,030	0,030	-	-	-
L245 or B	0,28	1,20	-	0,030	0,030	c,d	c,d	d
L290 or X42	0,28	1,30	-	0,030	0,030	d	d	d
L320 or X46	0,28	1,40	-	0,030	0,030	d	d	d
L360 or X52	0,28	1,40	-	0,030	0,030	d	d	d
L390 or X56	0,28	1,40	-	0,030	0,030	d	d	d
L415 or X60	0,28e	1,40e	-	0,030	0,030	f	f	f
L450 or X65	0,28e	1,40e	-	0,030	0,030	f	f	f
L485 or X70	0,28e	1,40e	-	0,030	0,030	f	f	f
Welded pipe
L175 or A25	0,21	0,60	-	0,030	0,030	-	-	-
L175P or A25P	0,21	0,60	0,045	0,080	0,030	-	-	-
L210 or A	0,22	0,90	-	0,030	0,030	-	-	-
L245 or B	0,26	1,20	-	0,030	0,030	c,d	c,d	d
L290 or X42	0,26	1,30	-	0,030	0,030	d	d	d
L320 or X46	0,26	1,40	-	0,030	0,030	d	d	d
L360 or X52	0,26	1,40	-	0,030	0,030	d	d	d
L390 or X56	0,26	1,40	-	0,030	0,030	d	d	d
L415 or X60	0,26e	1,40e	-	0,030	0,030	f	f	f
L450 or X65	0,26e	1,45e	-	0,030	0,030	f	f	f
L485 or X70	0,26e	1,65e	-	0,030	0,030	f	f	f

a 0,50 % maximum for copper; 0,50 % maximum fo Nickel; 0,50 % maximum for chromium; and 0,15 % maximum formolybdenum.
For grades up to and including L360/X52, Cu, Cr and Ni shall not be added intentionally.

b For each reduction of 0,01 % below the specified maximum concentration for carbon, an increase of 0,05 % above the specified maximum concentration for manganese is permissible, up to a maximum of 1,65 % for grades ≥ L245 or B, but ≤ L360 or X52; up to a maximum of 1,75 % for grades >L360 or X52, but <L485 or X70; and up to a maximum of 2,00 % for grade L485 or X70.

c Unless otherwise agreed, the sum of the niobium and vanadium contents shall be ≤ 0,06 %.

d The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0,15 %.

e Unless otherwise agreed.

f Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0,15 %.

API 5L PSL 1 Pipe Mechanical Properties Table

Pipe Grade	Pipe body of seamless and welded pipes			Weld seam of EW, SAW and COW pip
Pipe Grade	Yield strength R10,5 MPa(psi) minimum	Tensile strength Rm MPa(psi) minimum	Elongation Af % minimum	Tensile strength Rm MPa(psi) minimum
L175 or A25	175 (25 400)	310 (45 000)	c	310 (45 000)
L175P or A25P	175 (25 400)	310 (45 000)	c	310 (45 000)
L210 or A	210 (30 500)	335 (48 600)	c	335 (48 600)
L245R or BR L245 or B	245 (35 500)	415 (60 200)	c	415 (60 200)
L290R or X42R L290 or X42	290 (42 100)	415 (60 200)	c	415 (60 200)
L320 or X46	320 (46 400)	435 (63 100)	c	435 (63 100)
L360 or X52	360 (52 200)	460 (66 700)	c	460 (66 700)
L390 or X56	390 (56 600)	490 (71 100)	c	490 (71 100)
L415 or X60	415 (60 200)	520 (75 400)	c	520 (75 400)
L450 or X65	450 (65 300)	535 (77 600)	c	535 (77 600)
L485 or X70	485 (70 300)	570 (82 700)	c	570 (82 700)

aFor intermediate grades, the difference between the specified minimum tensile strength and the specified minimum yield strength for the pipe body shall be as given in the table for the next higher grade.

bFor intermediate grades, the specified minimum tensile strength for the weld seam shall be the same value as was determined for the pipe body using footnote a).

cThe specified minimum elongation, Af expressed in percent and rounded to the nearest percent, shall be as determined using the following equation;

where

C is 1 940 for calculations using SI units and 625 000 for calculations using USC units;

Axc is the applicable tensile test piece cross-sectional area, expressed in square millimetres (square inches), as follows:

----- for circular cross-section test pieces, 130 mm2 (0.20 in2) for 12,5 mm (0.500 in) and 8,9 mm (0.350 in) diameter test pieces; and 65 mm2(0.10 in2) for 6,4 mm (0.250 in) diameter test pieces;

------ for full-section test pieces, the lesser of a) 485 mm2 (0.75 in2) and b) the cross-sectional area of the test piece, derived using the specified outside diameter and the specified wall thickness of the pipe, rounded to the nearest 10 mm2 (0.01 in2);

----- for strip test pieces, the lesser of a) 485 mm2 (0.75 in2) and b) the cross-sectional area of the test piece, derived using the specified width of the test piece and the specified wall thickness of the pipe, rounded to the nearest 10 mm2(0.01 in2);

U is the specified minimum tensile strength, expressed in megapascals (pounds per square inch).

Tolerances for diameter and out-of-roundness

Specified outside diameter D mm (in)	Diameter tolerances mm (in)				Out-of-roundness tolerances mm (in)
	Pipe except the end a		Pipe end a, b, c		Pipe except the end a	Pipe end a, b, c
	SMLS pipe	Welded pipe	SMLS pipe	Welded pipe
< 60,3 (2.375)	- 0,8 (0.031) to + 0,4 (0.016)				d
≥ 60,3 (2.375) to ≤ 168,3 (6.625)	± 0,007 5 D		- 0,4 (o.o16) to + 1,6 (0.063)		0,020 D	0,015 D
>168,3 (6.625) to ≤ 610 (24.000)	± 0,007 5 D	± 0,007 5 D but.maximum of + 3,2 (0.125)	± 0,005 D, but maximum of ± 1,6 (0.063)
> 610 (24.000) to ≤ 1 422 (56.000)	± 0,01 D	± 0,005 D, but.maximum of + 4,0 (0.160)	± 2,0 (0.079)	±1,6 (0.063)	0,015 D but maximum of 15 (0.6), for d / t ≤ 75	0,01 D, but maximum of 13 (0.5). for d / t ≤ 75
					by agreement for d / t > 75	by agreement for d / t > 75
> 1 422 (56 000)	as agreed
a The pipe end includes a length of 100 mm (4.0 in) at each of the pipe extremities. b For SMLS pipe, the tolerances apply for t ≤ 25.0 mm (0.984 in). and the tolerances for thicker pipe shall be as agreed. c For pipe with D ≥ 219,1 mm (8.625 in), the diameter tolerance and the out-of-roundness tolerance may be determined using the calculated inside diameter (the specified outside diameter minus two times the specified wall thickness) or measured inside diameter rather than the specified outside diameter.(see 10.2.8.3.) d lncluded in the diameter tolerance.

Tolerances for wall thickness

Wall thickness
t
mm (in)

Tolerances a
mm (in)

SMLS pipe b

≤ 4,0 ( 0.157)

+ 0,6 (0.024)
- 0,5 (0.020)

> 4,0 ( 0.157) to <25,0 (0.984)

+ 0,150
- 0,125

≥ 25,0 (0.984)

+3,7 (0.146) or + 0,1 t, whichever is the greater
- 3,0 (0.120) or - 0,1 t, whichever is the greater

Welded pipe c, d

≤ 5,0 (0.197)

± 0,5 (0.020)

> 5,0 (0.197) to <15,0 (0.591)

± 0,1 t

≥ 15,0 (0.591)

±1,5 (0.060)

a   if the purchase order specifief a minus tolerance for wall thickness smaller than the applicable value given in this table, the plus tolerance for wall thickness shall be increased by an amount sufficient to maintain the applicable tolerance range.

b   for pipe with D ≥ 355,6 mm (14.000 in) and t ≥ 25,0 mm (0.984 in) the wall-thickness tolerance locally may exceed the plus tolerance for wall thickness by an additional 0,05 t, provided that the plus tolerance for mass (see 9.14) is not exceeded.

c   The plus tolerance for wall thickness does not apply to the weld area.

d   See 9.13.2 for additional restrictions.

Inspection Frequency for PSL1 Pipe

Type of Inspection	ype of pipe	requency of inspection
Heat analysis	All pipe	One analysis per heat of steel
Product analysis	SMLS, CW, LFW, HFW, LW, SAWL, SAWH, COWL or COWH	Two analyses per heat of steel (takenfrom separate product items)
Tensile testing of the pipe body of welded pipe with D ≤ 48.3 mm(1.900 in), in Grade L175 or A25	CW, LFW or HFW	Once per test unite of not more than 25 tonnes (28 tons) of pipe
Tensile testing of the pipe body of welded pipe with D ≤ 48.3 mm(1.900 in), in Grade L175P or A25P	CW
Tensile testing of the pipe body of welded pipe with D > 48.3 mm (1.900 in), in Grade L175 or A25	CW, LFW or HFW	Once per test unit of not more than 50 tonnes (55 tons) of pipe
Tensile testing of the pipe body of welded pipe with D > 48.3 mm (1.900 in), in Grade L175P or A25P	CW
Tensile testing of the pipe body of seamless pipe	SMLS	Once per test unit of pipe with the same cold-expansion ratio a
Tensile testing of the pipe body of welded pipe in grades higher than Grade L175 or A25	LFW, HFW, LW, SAWL, SAWHCOWL, or COWH
Tensile testing of the longitudinal or helical seam weld of weldedpipe with D ≥ 219.1 mm (8.625 in)	LFW, HFW, LW, SAWL, SAWHCOWL or COWH	Once per test unit of pipe with the samecold-expansion ratio a, b, c
Tensile testing of the strip/plate end weld of welded pipe with D ≥219.1 mm (8.625 in)	SAWH or COWH	Once per test unit or not more than 100lengths of pipe with the same coldexpansion ratio a, c, d
Bend testing of the longitudinal seam weld of welded pipe with D ≥48.3 mm (1.900 in), in Grade L175, L175P, A25 or A25P	CW, LFW, HFW or LW	Once per test unit of not more than 25tonnes (28 tons) of pipe
Bend testing of the longitudinal seam weld of welded pipe with 48,3mm (1.900 in) < D ≤ 60.3 mm (2.375 in), in Grade L175, L175P, A25 or A25P	CW, LFW, HFW or LW	Once per test unit of not more than50 tonnes (55 tons) of pipe
Guided-bend testing of the longitudinal or helical-seam weldof welded pipe	SAWL, SAWH, COWL or COWH	Once per test unit of not more than 25tonnes (28 tons) of pipe
Bend testing of the longitudinal seam weld of welded pipe with 48,3mm (1.900 in) < D ≤ 60.3 mm (2.375 in), in Grade L175, L175P, A25 or A25P	CW, LFW, HFW or LW	Once per test unit of not more than50 tonnes (55 tons) of pipe
Guided-bend testing of the longitudinal or helical-seam weld of welded pipe	SAWL, SAWH, COWL or COWH	Once per test unit of not more than 50lengths of pipe of the same grade
Guided-bend testing of the strip/plate end weld of welded pipe	SAWH or COWH	Once per test unit of not more than 50 lengths of pipe of the same graded
Guided-bend testing of the longitudinal seam weld of welded pipe withD ≥ 323.9 mm (12.750 in)	LW	Once per test unit of not more than 50lengths of pipe of the same grade
Flattening test of welded pipe	CW, LFW, HFW or LW	As shown in Figure 6
Hardness testing of hard spots in cold-formed welded pipe	LFW, HFW, LW, SAWL, SAWH,COWL or COWH	Any hard spot exceeding 50 mm (2.0 in)in any direction
Hydrostatic testing	SMLS, CW, LFW, LW, SAWL,SAWH, COWL or COWH	Each pipe
Macrographic testing of the longitudinal or helical-seam weld of welded pipe	SAWL, SAWH, COWL or COWH	At least once per operating shift plus whenever any change of pipe size occurs during the operating shift; or, if 10.2.5.3 applies, at the beginning of the production of each combination of specified outside diameter and specified wall thickness
Metallographic testing of the longitudinal seam weld of welded pipe	LFW or HFW	At least once per operating shift plus whenever changes of grade, specified outside diameter or specified wall thickness are made; plus whenever significant excursions from operating heat treatment conditions are encountered
Visual inspection	SMLS, CW, LFW, HFW, LW, SAWL, SAWH, COWL or COWH	Each pipe, except as allowed by 10.2.7.2
Pipe diameter and out-of-roundness	SMLS, CW, LFW, HFW, LW, SAWL, SAWH, COWL or COWH	At least once per 4 h per operating shift plus whenever any change of pipe size occurs during the operating shift
Wall thickness measurement	All pipes	Each pipe (see 10.2.8.5)
Weighing of pipe with D < 141.3 mm (5.563 in)	SMLS, CW, LFW, HFW, LW, SAWL, SAWH, COWL, or COWH	Each pipe or each convenient group of pipes, with the choice being at the discretion of the manufacturer
Weighing of pipe with D ≥ 141.3 mm (5.563 in)	SMLS, CW, LFW, HFW, LW, SAWL, SAWH, COWL or COWH	Each pipe
Non-destructive inspection	SMLS, CW, LFW, HFW, LW, SAWL, SAWH, COWL or COWH	In accordance with Annex E

Note:-
Other Specification Available	API 5L – A,B, X – 42, 46, 52, 56, 60, 65, 70, 80
Special Tube	Saw Pipes & Steam Pipes Precision Tubes Fabricated Pipe (with radiography)
In Form of	Round Hydraulic Tube & Horn Tube.
In Length of	Standard Double & In Cut length also.
Value Added Service	Draw & Expansion as per required Size & Length Heat Treatment Bending Galvanizing Annealed Sand Blasting Machining Etc.
Test Certificate	Manufacturer Test Certificate IBR Test Certificate (Form III-D) Laboratory Test Certificate from Govt. Approved Lab. Under Third Party Inspection with Excise Gate Pass to avail Modvat benefit.

Tests & Certificates

• Visual and Dimensional Inspection:

The pipe shall be delivered to the dimensions specified in the purchase order, subject to the applicable tolerances.
The pipe shall be delivered in random lengths or approximate length, as specified in the purchase order.

• Mechanical Tests:

Bend test
Guided - bend test
Tensile
Flattening
Expanding
Bending
Weld Ductility
Fracture Toughness
PP, PE Testing
Hydro Test
Hardness
Rediography

• Pipe weld and HAZ tests:

The minimum average absorbed energy for each pipe weld and HAZ test, based upon full-size test pieces and a test temperature of 0˚ C (32 ˚F).
27 J for pipe with D < 1 422 mm (56.000 in) in grade <= L555 or X80.
40 J for pipe with D >= 1 422 mm (56.000 in).
40 J for pipe in grade > L555 or X80.

• Metallographic Examination

• Chemical Analysis

• Hydrostatic Test

The pipe shall withstand the hydrostatic test without leakage through the weld seam or the pipe body
Jointers need not be hydrostatically tested, provided that the portions of pipe used in making the jointers were successfully hydrostatically tested prior to the joining operation.

• Non Destructive Inspection:
– Eddy Current
– Ultrasonic Test (Weld Check)
– Ultrasonic (full body, optional)

• Mill Test Certificates
– Acc. to EN 10204 2.1; 2.2; 3.1; 3.2
• NDT Standards
– U/S (EN ISO 10893-11 Level U3),
– E/C (EN ISO 10893-2 Level E2)
– API Annex E, Annex K
– EN ISO 3138 Annex E, Annex K
– CSA Z.2.245.1
• Surface conditions, Imperfection and defects:

All pipes shall be free from defects in the finished condition
All pipe shall be free from cracks, sweats and leaks

• Laminations:

Laminations or inclusions extending into the face or bevel of the pipe and having a visually determined length in the circumferential directions > 6,4 mm (0.250 in) shall be classified as defects. Pipes that contain such defects shall be rejected or cut back until no such lamination or inclusion is present at the pipe ends.

Coating: -

1. Corvel - 10-8158
2. FBE 3M XC 6171
3. Hempadur 45881
4. Hempel-Hempadur 85671
5. Interline 984
6. Interzone 954
7. Primer 3M Sxotchkote 345
8. Scotchkote 134
9. Sigma EPH 7479
10. Sihma Phenguard
11. Sigma Phenguard 935
12. Sigma Phenguard 940
13. Sigma Line 2000
14. Sigma Shield 1200
15. Carboline Plasite 7159
16. Enviroline 405 HT

The quality level of all Steel Line Pipe, API 5L X46 PSL1 Pipe is guaranteed by a complete internal Quality plan and certificating under ISO-9001, TUV (according to AD 2000-Merkblatt W0/TRD100), API, PED (accordance with Pressure Equipment Directive 97/23/EC), Burst test (Det Norske Veritas), and certainly Lloyds and Stoomwezen.

We mainly stock the Pipes of following make : Sumitomo Metal - Japan
Nippon Steel - Japan
JFE Steel - Japan
Kawasaki Steel - Japan
Vallourec & Mannesmann - France
Vallourec & Mannesmann - Germany
Vallourec & Mannesmann - Brazil
Salzgitter Mannesmann - Germany
Arcelor Mittal Steel - Romania
Arcelor Mittal Steel - Czech Republic
Tenaris Dalmine - Spain
Tenaris Silcotub - Romania
Tenaris Siderca - Argentina
Tenaris Tamsa - Mexico
Tenaris NKK - Japan
Volzhski - Russia
Nizhnedneprovsky - Ukraine
USS - USA
Welspun - India
Jindal Saw - India
Indian Seamless - India
Maharashtra Seamless – India

Third Party Inspection:

Image result for tuv logo for TPI

DNV - GL

Image result for DNV Gl logo tpi

VELOSI

Image result for Velosi tpi logo

SGS

Lloyds

EIL

Jacob

Image result for Jacob tpi logo

Bax Counsel

MECON

PDIL

API-5L-X52 PSL-1 Seamless, ERW, HFW, LSAW, DSAW, HSAW/SSAW (Spiral Welded) Line Pipe
API-5L Grade-B, X-42, X-46, X-52, X-56, X-60, X-65, X-70, X-80 PSL1 PSL2 Line Pipe

API 5L Grade B PSL1 Line Pipes - Available ex-stock
API 5L Grade B PSL1 Sour Service Line Pipes - Available ex-stock
API 5L Grade B PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X42 PSL1 Line Pipes - Available ex-stock
API 5L X42 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X42 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X46 PSL1 Line Pipes - Available ex-stock
API 5L X46 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X46 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X52 PSL1 Line Pipes - Available ex-stock
API 5L X52 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X52 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X56 PSL1 Line Pipes - Available ex-stock
API 5L X56 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X56 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X60 PSL1 Line Pipes - Available ex-stock
API 5L X60 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X60 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X65 PSL1 Line Pipes - Available ex-stock
API 5L X65 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X65 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X70 PSL1 Line Pipes - Available ex-stock
API 5L X70 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X70 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X80 PSL1 Line Pipes - Available ex-stock
API 5L X80 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X80 PSL1 NACE MR-0175 Line Pipes - Available ex-stock

Size Range: -

Seamless Pipe : ½” to 24”
ERW Pipe : ½” to 24”
LSAW/DSAW Pipe : 16” and Above
HSAW Pipe : 18” and Above

NPS
DESIGNATOR

SCH 10

SCH 20

SCH 30

SCH STD

SCH 40

SCH 60

SCH XS

SCH 80

SCH 100

SCH 120

SCH 140

SCH 160

SCH XXS

1/8"

1/4"

3/8"

1/2"

3/4"

1 1/4"

1 1/2"

2 1/2"

3 1/2"

10"

12"

14"

16"

18"

20"

22"

24"

26"

28"

30"

32"

34"

36"

38"

40"

42"

44"

46"

48"

Note: - We can supply heavy thickness of pipe as per clients requirements.

Other Related Grades: -

API 5L Grade B
API 5L Grade X42
API 5L Grade X46
API 5L Grade X52
API 5L Grade X56
API 5L Grade X60
API 5L Grade X65
API 5L Grade X70
API 5L Grade X80

API 5L Grade B PSL 1
API 5L Grade X42 PSL 1
API 5L Grade X46 PSL 1
API 5L Grade X52 PSL 1
API 5L Grade X56 PSL 1
API 5L Grade X60 PSL 1
API 5L Grade X65 PSL 1
API 5L Grade X70 PSL 1
API 5L Grade X80 PSL 1

API 5L Grade B PSL 2
API 5L Grade X42 PSL 2
API 5L Grade X46 PSL 2
API 5L Grade X52 PSL 2
API 5L Grade X56 PSL 2
API 5L Grade X60 PSL 2
API 5L Grade X65 PSL 2
API 5L Grade X70 PSL 2
API 5L Grade X80 PSL 2

API 5L Grade B PSL 1 SEAMLESS
API 5L Grade X42 PSL 1 SEAMLESS
API 5L Grade X46 PSL 1 SEAMLESS
API 5L Grade X52 PSL 1 SEAMLESS
API 5L Grade X56 PSL 1 SEAMLESS
API 5L Grade X60 PSL 1 SEAMLESS
API 5L Grade X65 PSL 1 SEAMLESS
API 5L Grade X70 PSL 1 SEAMLESS
API 5L Grade X80 PSL 1 SEAMLESS

API 5L Grade B PSL 2 SEAMLESS
API 5L Grade X42 PSL 2 SEAMLESS
API 5L Grade X46 PSL 2 SEAMLESS
API 5L Grade X52 PSL 2 SEAMLESS
API 5L Grade X56 PSL 2 SEAMLESS
API 5L Grade X60 PSL 2 SEAMLESS
API 5L Grade X65 PSL 2 SEAMLESS
API 5L Grade X70 PSL 2 SEAMLESS
API 5L Grade X80 PSL 2 SEAMLESS

API 5L Grade B PSL 1 SAW
API 5L Grade X42 PSL 1 SAW
API 5L Grade X46 PSL 1 SAW
API 5L Grade X52 PSL 1 SAW
API 5L Grade X56 PSL 1 SAW
API 5L Grade X60 PSL 1 SAW
API 5L Grade X65 PSL 1 SAW
API 5L Grade X70 PSL 1 SAW
API 5L Grade X80 PSL 1 SAW

API 5L Grade B PSL 2 SAW
API 5L Grade X42 PSL 2 SAW
API 5L Grade X46 PSL 2 SAW
API 5L Grade X52 PSL 2 SAW
API 5L Grade X56 PSL 2 SAW
API 5L Grade X60 PSL 2 SAW
API 5L Grade X65 PSL 2 SAW
API 5L Grade X70 PSL 2 SAW
API 5L Grade X80 PSL 2 SAW

API 5L Grade B PSL 1 ERW
API 5L Grade X42 PSL 1 ERW
API 5L Grade X46 PSL 1 ERW
API 5L Grade X52 PSL 1 ERW
API 5L Grade X56 PSL 1 ERW
API 5L Grade X60 PSL 1 ERW
API 5L Grade X65 PSL 1 ERW
API 5L Grade X70 PSL 1 ERW
API 5L Grade X80 PSL 1 ERW

API 5L Grade B PSL 2 ERW
API 5L Grade X42 PSL 2 ERW
API 5L Grade X46 PSL 2 ERW
API 5L Grade X52 PSL 2 ERW
API 5L Grade X56 PSL 2 ERW
API 5L Grade X60 PSL 2 ERW
API 5L Grade X65 PSL 2 ERW
API 5L Grade X70 PSL 2 ERW
API 5L Grade X80 PSL 2 ERW

API 5L Grade B PSL 1 HFW
API 5L Grade X42 PSL 1 HFW
API 5L Grade X46 PSL 1 HFW
API 5L Grade X52 PSL 1 HFW
API 5L Grade X56 PSL 1 HFW
API 5L Grade X60 PSL 1 HFW
API 5L Grade X65 PSL 1 HFW
API 5L Grade X70 PSL 1 HFW
API 5L Grade X80 PSL 1 HFW

API 5L Grade B PSL 2 HFW
API 5L Grade X42 PSL 2 HFW
API 5L Grade X46 PSL 2 HFW
API 5L Grade X52 PSL 2 HFW
API 5L Grade X56 PSL 2 HFW
API 5L Grade X60 PSL 2 HFW
API 5L Grade X65 PSL 2 HFW
API 5L Grade X70 PSL 2 HFW
API 5L Grade X80 PSL 2 HFW

API 5L Grade B PSL 1 WELDED
API 5L Grade X42 PSL 1 WELDED
API 5L Grade X46 PSL 1 WELDED
API 5L Grade X52 PSL 1 WELDED
API 5L Grade X56 PSL 1 WELDED
API 5L Grade X60 PSL 1 WELDED
API 5L Grade X65 PSL 1 WELDED
API 5L Grade X70 PSL 1 WELDED
API 5L Grade X80 PSL 1 WELDED

API 5L Grade B PSL 2 WELDED
API 5L Grade X42 PSL 2 WELDED
API 5L Grade X46 PSL 2 WELDED
API 5L Grade X52 PSL 2 WELDED
API 5L Grade X56 PSL 2 WELDED
API 5L Grade X60 PSL 2 WELDED
API 5L Grade X65 PSL 2 WELDED
API 5L Grade X70 PSL 2 WELDED
API 5L Grade X80 PSL 2 WELDED

API A25 PSL 1 SEAMLESS
API A25P PSL 1 SEAMLESS
API A25 PSL 1 WELDED
API A25P PSL 1 WELDED

API BR SEAMLESS & WELDED
API X42R SEAMLESS & WELDED
API BN SEAMLESS & WELDED
API X42N SEAMLESS & WELDED
API X46N SEAMLESS & WELDED
API X52N SEAMLESS & WELDED
API X56N SEAMLESS & WELDED
API X60N SEAMLESS & WELDED

API BQ SEAMLESS & WELDED
API X42 Q SEAMLESS & WELDED
API X46 Q SEAMLESS & WELDED
API X52 Q SEAMLESS & WELDED
API X56 Q SEAMLESS & WELDED
API X60 Q SEAMLESS & WELDED
API X65 Q SEAMLESS & WELDED
API X70 Q SEAMLESS & WELDED
API X80 Q SEAMLESS & WELDED
API X90 Q SEAMLESS & WELDED
API X100 Q SEAMLESS & WELDED

API BM WELDED
API X42 M WELDED
API X46 M WELDED
API X52 M WELDED
API X56 M WELDED
API X60 M WELDED
API X65 M WELDED
API X70 M WELDED
API X80 M WELDED
API X90 M WELDED
API X100 M WELDED
API X120 M WELDED

API BNS SEAMLESS & WELDED
API X42NS SEAMLESS & WELDED
API X46NS SEAMLESS & WELDED

API X52NS SEAMLESS & WELDED
API BQS SEAMLESS & WELDED
API X42QS SEAMLESS & WELDED
API X46QS SEAMLESS & WELDED
API X52QS SEAMLESS & WELDED
API X56QS SEAMLESS & WELDED
API X460QS SEAMLESS & WELDED
API X65QS SEAMLESS & WELDED
API X70QS SEAMLESS & WELDED

API BMS WELDED
API X42MS WELDED
API X46MS WELDED
API X52MS WELDED
API X56MS WELDED
API X60MS WELDED
API X65MS WELDED
API X70MS WELDED

API BNO SEAMLESS & WELDED
API X42NO SEAMLESS & WELDED
API X46NO SEAMLESS & WELDED
API X52NO SEAMLESS & WELDED
API BQO SEAMLESS & WELDED
API X42 QO SEAMLESS & WELDED
API X46 QO SEAMLESS & WELDED
API X52 QO SEAMLESS & WELDED
API X56 QO SEAMLESS & WELDED
API X60 QO SEAMLESS & WELDED
API X65 QO SEAMLESS & WELDED
API X70 QO SEAMLESS & WELDED
API X80 QO SEAMLESS & WELDED
API X90 QO SEAMLESS & WELDED
API X100 QO SEAMLESS & WELDED

API BMO WELDED
API X42 MO WELDED
API X46 MO WELDED
API X52 MO WELDED
API X56 MO WELDED
API X60 NO WELDED
API X65 MO WELDED
API X70 MO WELDED
API X80 MO WELDED

api psl1 line pipe

Phone : +91 22 43431313
eMAIL : sales@api5lpipes.com

CERTIFICATE

PRODUCTS

PRODUCTS

products

Products