API 5L NACE MR0175 Pipes

API 5L NACE MR0175 Pipe is made as per the American Petroleum Institute specification. API 5L is used in transportation system. In industries such as Textile, Dairy, Oil & Gas, Petrochemical, Sugar, Paper, Chemical & Fertilizers, Engineering, Power Generation and Nuclear Industries, the API 5L Seamless Pipes could be used as a fluid pipe, water pipe, line pipe, structure steel tube, and piling tubes.

API 5L NACE MR0175 Pipe is manufactured in compliance with the International Organization for Standardization (ISO) 3183 standards. This standardizes the standards for the petrochemical, refining and natural gas sectors for products, facilities, and offshore structures.

We are Stockist & Supplier or Exporter OF API 5L NACE MR0175 Pipe in Worldwide.

Looking for an order and get in touch with us. Click here.

More about API 5L NACE MR0175Pipe Specifications

The document too frequently referred to simply as “NACE”, was first issued in 1975 by the National Association of Corrosion Engineers, now known as NACE International. NACE MR0175, is titled Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production. It was issued as a recommendation of threshold limits of H2S above which precautions against environmental cracking are considered necessary. In 2003, a similar document was issued to cover the refining industry, NACE MR0103 Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments. Also in 2003, MR0175 was adopted by ISO and designated as ISO 15156.

NACE MR0175/ISO 15156 consists of three parts:
          — Part 1: General principles for selection of cracking-resistant materials
          — Part 2: Cracking resistant carbon and low-alloy steels, and the use of cast irons
          — Part 3: Cracking resistant CRAs (corrosion resistant alloys) and other alloys

The H2S threshold limits have been established based upon a combination of operator experience and laboratory evaluation. The document continues to evolve with the addition of alloys and refinement of the threshold limits. How the threshold limits are defined varies dramatically between alloys or alloy families and the period during which the requirements were added or revised. For some alloys the H2S threshold limits consider CO2, chlorides, pH, temperature, hardness and yield strength. For other alloys the limits are not as strictly defined. MR0175 also provides guidance for the selection and specification of materials when the H2S thresholds are exceeded. This allows for fit for purpose testing to qualify a material for a specific application. MR0175 also provides some application specific limits.

NACE MR0175/ISO 15156 only addresses the resistance of materials to environmental cracking that can be caused by H2S. It does not address loss of material by general corrosion or localized corrosion such as pitting or crevice corrosion. It is also not a material specification, in that it does not address minimum mechanical properties, manufacturing processes or quality control requirements such as microstructure and non-destructive examination. Just because a material “meets NACE”, doesn’t mean it is fit for service. A perfectly bad piece of material can “meet NACE”. Material specifications such as API 5CRA/ISO 13680 address the requirements for mechanical properties and quality.

We have the complete range of pipes in both PSL1 and PSL2 in seamless and welded to meet your needs. Plus, we can ship globally with a fast turn-around time at the best price.

PSL1 and PSL2 are the two product specification levels which the Technical Committee accepted.

PSL 1 contains standard quality pipes, while PSL 2 pipes have specific chemical & mechanical properties and their testing requirements are also special.

As a manufacturer and supplier it gives us greater control over delivery schedules and custom orders for our client’s.

error: Content is protected !!